DC Motor of Z710-1400kw High Voltage DC Motor

DC Motor of Z710-1400kw High Voltage DC Motor

Solution Description:
DC motor is a rotating motor that can transform DC electric powered power into mechanical energy (DC motor) or mechanical strength into DC electric powered energy (DC generator). It is a motor that can change DC and mechanical energy into one an additional. When it operates as a motor, it is a direct present motor, which converts electrical strength into mechanical power when it operates as a generator, it is a immediate recent generator, which converts mechanical strength into electrical power.

Merchandise Name DC Motor of Z710-1400KW Large Voltage DC Motor
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The composition of DC motor should consist of two parts: stator and rotor. The static element of DC motor is named stator. The main operate of stator is to produce magnetic area, which is composed of foundation, principal magnetic pole, commutation pole, finish cap, bearing and brush device. Working portion is known as rotor, whose principal operate is to create electromagnetic torque and inductive electromotive force. It is the hub of strength conversion of DC motor. So it is also typically called armature, which is composed of rotor, armature main, armature winding, commutator and supporter.
Design Z Type
Seat amount Z315-Z1000
energy 60~2800kW
Voltage 220~1000V
Torque variety 1.5 ~180kNm
Safety stage IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Working speed  Constant Velocity /Low Velocity /Modify Speed /Substantial Speed Other 
Main classification DC Motor is a equipment that converts mechanical energy into DC electrical power. It is largely used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power provide of alternator. Even though in spots exactly where DC electrical power is needed, AC power rectifier is also used to change AC into DC energy, but from some elements of overall performance, AC rectifier electricity offer can not totally change DC generator.  
Software DC motors are broadly utilized in tape recorders, movie recorders, video clip discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Maintenance technique Expert motor upkeep center motor maintenance method: cleaning stator and rotor – replacing carbon brush or other elements – vacuum F pressure dipping paint – drying – Calibration stability.
one. Use surroundings must be always dry, motor area ought to be stored thoroughly clean, air ingestion should not be hindered by dust, fibers and other hurdles.
2. When the thermal security of the motor proceeds to function, it ought to be ascertained no matter whether the fault comes from the motor or the overload or the environment value of the protective gadget is as well low. After eliminating the fault, it can be put into procedure.
three, make certain that the motor is well lubricated during procedure. The basic motor operates for about 5000 hours, that is to say, lubricating grease should be additional or changed. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic strain need to adjust lubricating grease in time. When replacing grease, the previous grease should be removed, and the oil groove of bearing and bearing include need to be washed with gasoline. Then ZL-three lithium grease should be filled with 1/2 (2 poles) and two/3 (4 poles, 6 poles and 8 poles) of the cavity in between the interior and outer rings of the bearing.
4. When the existence of the bearing is above, the vibration and sound of the motor will improve clearly. When the radial clearance of the bearing reaches the adhering to benefit, the bearing should be replaced.
5, when eliminating the motor, it is Okay to eliminate the rotor from the shaft extension or the non extension stop. If it is not needed to unload the admirer, it is far more practical to get out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from being damaged.
6. When replacing the windings, the type, size, turns and gauges of the authentic windings have to be recorded. When these data are lost, they ought to be attained from the manufacturer and the unique made windings ought to be modified at will, which frequently deteriorates one or many performance of the motor or even can make it impossible to use them.



DC Motor of Z710-1400kw High Voltage DC Motor


motor base

As one of leading motor base manufacturers, suppliers and exporters of mechanical products, We offer motor base and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of motor base

Recent Posts