DC Oil Drilling Motor with Silver Wire for Drilling Rig

DC Oil Drilling Motor with Silver Wire for Drilling Rig

Item Description:
 DC Oil Drilling Motor with Silver wire for Drilling rig
DC motor is a rotating motor that can transform DC electrical power into mechanical vitality (DC motor) or mechanical power into DC electric power (DC generator). It is a motor that can change DC and mechanical energy into one an additional. When it runs as a motor, it is a immediate current motor, which converts electrical vitality into mechanical power when it runs as a generator, it is a direct existing generator, which converts mechanical strength into electrical power.

Item Identify DC Oil drilling motor
Motor Sort DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition framework The construction of DC motor need to consist of two parts: stator and rotor. The static part of DC motor is referred to as stator. The main function of stator is to generate magnetic discipline, which is composed of base, major magnetic pole, commutation pole, conclude cap, bearing and brush unit. Operating element is named rotor, whose main perform is to produce electromagnetic torque and inductive electromotive drive. It is the hub of energy conversion of DC motor. So it is also commonly referred to as armature, which is made up of rotor, armature main, armature winding, commutator and supporter.
Model Z Kind
Seat variety Z315-Z1000
electricity 60~2800kW
Voltage 220~1000V
Torque range one.five ~180kNm
Security level IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Working speed  Constant Pace /Minimal Speed /Alter Velocity /Substantial Speed Other 
Primary classification DC Motor is a machine that converts mechanical energy into DC electricity. It is largely utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy provide of alternator. Although in spots the place DC electrical power is required, AC electrical power rectifier is also utilized to convert AC into DC electrical power, but from some factors of efficiency, AC rectifier electrical power offer can not totally substitute DC generator.  
Software DC motors are extensively utilized in tape recorders, movie recorders, video clip discs, electric shavers, hair dryers, electronic watches, toys and so on.
Upkeep method Specialist motor maintenance centre motor upkeep procedure: cleaning stator and rotor – replacing carbon brush or other elements – vacuum F stress dipping paint – drying – Calibration harmony.
one. Use environment need to be usually dry, motor area must be retained clear, air consumption ought to not be hindered by dust, fibers and other obstructions.
two. When the thermal safety of the motor carries on to operate, it should be ascertained whether or not the fault comes from the motor or the overload or the placing value of the protective gadget is as well lower. After reducing the fault, it can be put into procedure.
3, ensure that the motor is properly lubricated in the course of procedure. The basic motor operates for about 5000 hrs, that is to say, lubricating grease need to be added or replaced. When bearing overheating or lubricating deterioration is discovered in procedure, the hydraulic force should change lubricating grease in time. When replacing grease, the outdated grease ought to be removed, and the oil groove of bearing and bearing cover ought to be washed with gasoline. Then ZL-three lithium grease must be filled with one/2 (2 poles) and 2/three (four poles, 6 poles and 8 poles) of the cavity between the inner and outer rings of the bearing.
4. When the lifestyle of the bearing is more than, the vibration and sound of the motor will enhance clearly. When the radial clearance of the bearing reaches the subsequent price, the bearing ought to be changed.
5, when removing the motor, it is Ok to remove the rotor from the shaft extension or the non extension finish. If it is not required to unload the supporter, it is more practical to just take out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from being destroyed.
6. When changing the windings, the kind, dimensions, turns and gauges of the first windings should be recorded. When these information are dropped, they must be received from the company and the first made windings should be changed at will, which typically deteriorates a single or many performance of the motor or even makes it unattainable to use them.



DC Oil Drilling Motor with Silver Wire for Drilling Rig


motor base

As one of leading motor base manufacturers, suppliers and exporters of mechanical products, We offer motor base and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of motor base

Recent Posts