Integrated Brushless Actuating Motor with Driver Built-in

Integrated Brushless Actuating Motor with Driver Built-in

 Integrated Brushless Actuating Motor with Driver Created-in

57IV90/57IV130/57IV180 Attributes
one.Working voltage: DC enter voltage 15VDC to 50VDC ,advise voltage is 36V
two.The max continuous output current is 10A, the max peak current is 22A (3 times overload ability) 
3.Appropriate differential or single-finished pulse / path command, have a few management method of position, pace and torqe
4.Making use of FOC magnetic placement control technology and room vector pulse width modulation (SVPWM) shut-loop manage technology
5.The quantity of pulses for every cycle (subdivision) can be set by the debug application or the dial change environment(electronic equipment ratio)
six.Have three types of 90w,130w and 180w DC brushless servo motor to decide on.
7.Have safety of overvoltage, undervoltage, overcurrent and tolerance,and many others.
eight.Solitary / double pulse method, the pulse legitimate edge can be decide on.
nine.The max pulse frequency of control instruction is 500KHz (manufacturing facility default is 200KHz)
ten.Pulse, course and allow signal input interface level is 4.5 to 28V appropriate
11.With serial RS232 / RS485 debugging operate, but want to use our specific serial debugging cable 
twelve.Functionality: smooth pace, tiny overshoot ,small monitoring mistake, low heat of motor and driver

Driver Product And Choice Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.five 146.2 0.5
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Safety Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.five-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(200-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Switch Settings

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
1000 ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
10000 OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision precision (digital equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the drive employs the interior default micro-step subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the digital gear ratio can also be set by the debugging software program. SW5 set the motor course,when turnON, the motor turns clockwise (CW),when switch OFF, the motor turns counterclockwise(CCW). SW6 control mode assortment, whenON, the motor enters the self-take a look at manner,making a single CZPT and reverse revolution, has been repeated right up until exit self-take a look at method, the exterior manage signal is invalid at self check method, whenOFF, the motor exits self-check method,then the exterior handle sign is valid.

Mechanical Structure Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 seventy six thirty.2 106.2
57IV130  96 thirty.2 126.two
57IV180  116 30.two 149.2

Be aware : All above is generally utilised, and we can personalize according to your ask for or select the suitable model for you, remember to inform us adhering to parameters: recent, voltage, holding torque, human body length,the software area.

Application
Suited for all kinds of small and medium-sized automation equipments and devices. These kinds of as: laser gear, health care products, 3D printer, tiny and medium-sized engraving equipment, electronic processing products, automatic crawling gear, specific CNC device tool, packaging equipment and robot. It is particularly valuable for end users who expect lower sound and substantial pace programs.

Packaging and shipping
1.Outer packing: CZPT export carton with required transport marks
two.Interior packing: Water-resistant packing with shock absorbing EPE and cardboard surrounded 
three.As per the consumers requirements

Our support
one.Functioning time : 8:00 a.m – ten:00 p.m .Any queries, make sure you tell us freely, we will be reply you asap.
two.Guide time : For samples, 2 to five days will be Ok. For mass creation, the guide time count on the quantities you require.
3.Warrantity period : eighteen months and Daily life-extended routine maintenance service for the merchandise.
four.We accept items personalize.

FAQ
Q1: How to decide on the ideal stepper or servo motor?
A1: There are serveral important items: size, duration, keeping torque, voltage, existing etc.Soon after validate them and informed us, we can decide on the appropriate 1 for you.

Q2: Any other strategies to finalize the design?
A2: Certain, you can send us the model you are using, we can aid you uncover the ideal a single.

Q3:How to guarantee the Quality of CZPT Parts?
A3: We have the integrated technique for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in method high quality manage section), FQC (final top quality control) and OQC (out-going quality management) to manage each procedure of industrial areas prodution.

This fall:What’s the Benefit of Your Areas for Industry Items? 
A4:one.The edge of our items is the competitive charges, quick supply and higher quality. Our
workers are responsible-oriented, friendly-oriented,and diligent-oriented. Our merchandise are showcased by strict tolerance, easy end and long provider time.
two.Just before we deliver out the items,we check out them a lot more than three times.

Speak to

 

Integrated Brushless Actuating Motor with Driver Built-in

Tags:

motor base

As one of leading motor base manufacturers, suppliers and exporters of mechanical products, We offer motor base and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of motor base

Recent Posts